icon-mess
icon-mess
Kỹ Thuật
icon-mess
 

Air shower automatic sliding door

Air shower is a device installed at the entrance of a clean room for the purpose of removing contaminants, dust on hospital staff, materials and tools before staff, materials and tools are brought in. into the clean room. Air Shower is often applied in electronics, chemical, medicine, pharmaceutical industries...

- Principle of operation: When someone moves into the Air Shower. The system will be started by an inductive sensor, the clean air that has been filtered through the Hepa filter is blown out at high speed through the wall-mounted nozzles, removing 99.99% of dust particles as small as possible. 0.3 microns. The air velocity is in the range of 16-28m/s. Contaminated air will be drawn into the slot at the bottom of the cabinet, filtered and then returned to the chamber.

- Made in: Bach Long - Vietnam with basic characteristics.

  • Air shower can be used for staff, materials, trolleys, forklifts to be cleaned of dirt before entering the clean room.
  • The emergency stop switch brings the unit to a decommissioned state immediately
  • Power cut-off mechanism in case of fault.
  • Indicator light for the operating status of the device.
  • LED display controller with function keys, capable of setting and adjusting the blowing time of the Air-shower.
  • Dimensions can be changed according to customer requirements.
  • Warranty: The equipment warranty is 1 year.

- Technical support: 5 years after the warranty period.

- About replacing components: Normal HEPA filters need to change HEPA filters every 6 months - 1 year. The pre-filter needs to be changed every 3-6 months.

If you cooperate with us, please contact:

BACH LONG MANUFACTURING TRADING SERVICES CO., LTD

Address: 75 Nguyen Hong Street, Ward 1, Go Vap District, City. Ho Chi Minh

Factory: 365/13 Provincial Road 15, Tan Thanh Dong, Cu Chi, City. Ho Chi Minh

Hotline: 093 143 54 54 - Email: sales@congnghelockhi.vn

Website: www.congnghelockhi.vn - www.congnghelockhi.com

Products specifications
Model B&L-1500R-2
Exterior Size W*D*H mm 3100*2300*2600mm
Interior Size W*D*H mm 1500*2000*2400mm
Power Source AC380V / 50Hz / 3Ph
Jet Nozzles 16+16+16
Air Velocity 22-25m / s
Air Shower Time 0-99 seconds adjustable
Filter Efficacy 99.99% 0.3um
Pre G4
Material SUS 210, SUS 430, SUS 304 or powder coated Tole
Door SUS 210, SUS 430, SUS 304 or powder coated Tole
Door Type Automatic sliding doors open to both sides
Lighting Ceiling Led
Electronic Lock An interlock is a system consisting of two interconnected doors. One door cannot be opened until the other is closed.
Fan AC380V / 50Hz / 3Ph
Customized design welcome B&L produced according to customer's request